Loading...Overclock: AMD Dual-Core Opteron 165 1800MHz @ 2700MHz (150.00%)
Overclock
| Overclocked frequence: | |
| Original frequence: |
Overclock specs
| Overclocked: | Original: | |
|---|---|---|
| Overclock frequence: | 2700 MHz | 1800 MHz |
| MP Frequence * MP: | 300 * 9 | |
| Voltage: | 1.31 V | 1.30-1.35 V |
System specs
| Cooling: | Tuniq Tower 120 |
| Cooling category: | Extreme air cooling (Extreme cpu cooler and/or >3 case fans) |
| Cool'n'quiet: | No |
| Idle/load temperature: | 43 °C / 57 °C |
| Motherboard: | DFI Lanparty UT nf4 Ultra-D |
| Bios version: | 04/06/2006 |
| Chip(set): | nVidia nForce4 Ultra |
Validation - beta 
| Level: | 1. POST/OS |
| CPU-Z validation link: | http://valid.canardpc.com/show_oc.php?id=236159 |
Overclock extra (optional)
| Screenshot: | |
| Futuremark link: | |
| Extra link: | |
| Notes: |
I ran Orthos to make sure both cores were at 100%. I let Orthos run for a bit to make sure the cores were warm. FSB 300 HTT x3 CPU Voltage set to Auto in bios - Everest shows it at 1.31 LDT 1.3V Chipset 1.6V DRAM 2.8V Memory running at 2/3 ratio for 200Mhz clock. This was a closed case test, and better results so I'm updating my previous OC!!! |
Member
| Member: | blackyoda |
Processor specs ( LCBQE 0722 RPBW - Green - CD )
| Processor: | AMD Dual-Core Opteron 165 (Dual-core) |
| Processor tray (pib): | OSA165DAA6CD (OSA165CDBOX) |
| Processor stepping: | E6 |
| Stepping: | LCBQE 0722 RPBW - Green - CD |
| Processor frequence: | 1800 MHz |
| Socket: | socket 939 |
| Memory controller: | dual ddr 400 MHz |
| HTT speed (version): | 1000 MHz (1.0) |
| L1 / L2 cache memory: | 128 KB / 1024 KB |
| Operating mode: | 32/64 |
| Voltage: | 1.30-1.35 V |
| Thermal power: | 110 W |
| Max temp: | 65 °C |
| Processor tech: | 90 nm, SOI (silicon-on-insulator) |
| Die-size, total transistors: | 199 mm², 233.2 million |
By closely observing and maintaining the following priorities 
In 2006 / 2007 
